home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Overload Trio 2
/
Shareware Overload Trio Volume 2 (Chestnut CD-ROM).ISO
/
dir31
/
ac37musd.zip
/
README
< prev
next >
Wrap
Text File
|
1994-02-12
|
10KB
|
204 lines
ACCU Music System for DOS
Copyright 1994 by Kevin Fischer
Version 3.7 - February 12, 1994
NOTE: The documentation is contained within an archive. When you use the
INSTALL program, it will copy it over in normal text format.
FIRST TIME PROGRAM INSTALLATION:
First, you will need to install ACCU Music System onto another floppy disk
or to a hard disk directory. Here's some brief instructions on how to do
this:
1) Begin, by running the INSTALL.EXE program from either the disk or
hard disk directory where the files for the program are located.
NOTE: Be sure to change to the drive or directory where INSTALL.EXE is
located (i.e. don't type B:INSTALL).
2) It will first ask you if you want to read this README file and the
HISTORY.DOC file.
3) Next, it will go through the modules which you can install. You do
not have to install all of them, but it is recommended that you
install the program files for ACCU Music System and the
documentation. The STANDARD.BNK module is only if you have a sound
card. If you DO NOT have a sound card, you do not need to install
this. Just select the modules you want or don't want by pressing Y
or N.
4) You will then be prompted for a destination drive. Press the letter
of the drive to install to. It will then prompt you for a directory
(it defaults to \MUSICSYS for hard drives and \ for floppy drives).
Press ENTER to keep it, or change it as you please. It will then
check the available space on your destination location and then
install the modules you selected. It will verify the integrity of
each archive module and then decompress it into the destination
drive/directory.
If you are working with a floppy drive only system, you may have to do
multiple installations in order to get it completely installed. This is
because if you are installing to your 2nd floppy, the music program and
documentation may not both fit. With 720k, 1.2mb, and 1.44mb floppy
disks, this shouldn't be a problem.
After running the installation program, it will automatically change to
the drive and directory where you installed the program.
UPGRADE PROGRAM INSTALLATION:
The install program can also be used to upgrade an older version of ACCU
Music System. Simply select the same drive and directory as the old
version for your new installation. It will overwrite any old ACCU Music
System files that already are there. It will not overwrite any of your
data files.
If, for some reason, your upgraded copy of ACCU Music System does not seem
to work correctly (i.e. messed up screen colors, etc.), try erasing the
MUSICSYS.CFG file. This should usually not be a problem.
INSTALLATION NOTES:
The installation program verifies the integrity of all modules that it
installs. This includes INSTALL.DAT, INSTALLn.DAT, and other files it
installs. If some of these files have been corrupted, altered, or is
missing, the program will stop the installation and inform you of the
problems it encountered. You should obtain a new copy of ACCU Music
System and try re-installing.
PROBLEMS, QUESTIONS, CONTACTING THE AUTHOR:
If you encounter any problems, have any questions, etc., I can be
contacted in the following ways:
U.S. Mail: Kevin Fischer
c/o ACCU Music System
16878 Saint James Drive
Poway, CA 92064-1137
USA
Electronic mail - Internet address: kfischer@seas.ucla.edu
PROGRAM DISTRIBUTION:
This program is being distributed as ShareWare. This means that I
encourage the passing around of it and its availability to the public. It
also means that I invite you to register your copy of ACCU Music System.
The shareware version of the program is identical to the registered
version of the program. NOTE: There is a begging screen when you exit
the program and a one-line registration reminder that appears on all
printed sheet music. If you register, BOTH of these annoyances WILL be
disabled by the registration code. Please register this program if you
continue to use it in the future. See the documentation and REGISTER.FRM
for more information on registering.
USES FOR THIS PROGRAM:
This program includes everything that you need to create your own music on
your computer. It has a graphics-based (or text-based) editor which
allows you to enter notes and see them on the screen as well. It includes
a transposer which will let you change the key signature of your music as
well as raise/lower your music by half steps. It also allows you to print
out your music in sheet music format. It allows you to play your music on
the PC speaker or on a sound card. Finally, you can convert your songs to
the .ROL format for distribution. Your songs can range from simple one
voice files to complex multiple-voice songs with multiple instruments,
etc.
Previous users of this program have found this program useful for many
applications. Below is a list of possible uses:
o Students:
- Use this for typing in your own musical compositions and seeing
how they sound. Then print out your music for others to play.
- Type in parts from band or orchestra. Print it out so you can
read the music better (rather than trying to read someone else's
poorly handwritten music). Transpose the music to another key
signature for easier playing. Transpose the music to another
instrument (i.e. Bass clef baritone to treble clef) by raising
or lower it by half steps. Play it on the speaker or sound card
so you can hear what it is supposed to sound like.
- Use it to keep a collection of scales, etudes, or songs on file
for other students.
o Teachers/Directors:
- Use this program to type in music for your students for
distribution to them. This is a low-cost alternative to
professional music packages.
- Use it for transposing parts for different instruments.
- Use it for teaching about music - notes, chords, etc. Combine
both the printouts and playing ability to demonstrate music
concepts.
o Sound card owners
- Use this program to create music for your Adlib compatible sound
card. Use standard music notation rather than unfamiliar
'player piano' style of composition.
- Use it to print out copies of your music.
- Use it to convert your collection of .ROL files to sheet music
printouts so you can play the songs yourself (on a keyboard,
with an instrument, etc.).
o Music Enthusiasts
- Use it to create your own printed sheet music rather than
handwriting the music. It makes it easier if you make mistakes
or change the music often.
- Play your music so you can hear what it sounds like.
o Religious leaders or religious music organizers
- Use it for creating readable music for your organist or other
instruments.
- Use it for creating a music book.
Quite a few of the above applications have been used with ACCU Music
System by registered users. I'm sure there are other uses I have not
thought of as well.
SOUND CARD USE
In order to use a sound card with ACCU Music System, you need an Adlib
compatible sound card. You will also need a sound driver. See the
documentation for complete information on how to obtain drivers (see SOUND
CARD USE).
ABOUT THE PROGRAM:
ACCU Music System is written in C++ (although most of it is standard C)
and compiled with Borland C++ 3.1. It started out as a BASIC program on
my Atari. It easily outgrew that and so was rewritten in C on the IBM.
It is currently over 30,000 lines long. Any comments or questions about
the program and how it works are welcome.
This program was formerly named ACCU Music Printer. I changed the name
starting with version 3.0 to reflect the fact that not only does it print
music, but it edits it, transposes it, converts it, plays it, AND prints
it.
ABOUT THE AUTHOR
I am currently attending the University of California Los Angeles (UCLA),
majoring in Computer Science. I am a junior there this winter. My
permanent address is in Poway, California which is a city only 30 miles
away from downtown San Diego. I have been programming for a number of
years. I first started out on the Atari 800 with BASIC and have
progressed to C on the IBM PC. I have written several other shareware
programs for the IBM. I have an interest in music, thus the writing of
ACCU Music System.
If you have any ideas for other programs, please let me know.
ASP - Association of Share Professionals
This program is produced by a member of the Association of Shareware
Professionals (ASP). ASP wants to make sure that the shareware principle
works for you. If you are unable to resolve a shareware-related problem
with an ASP member by contacting the member directly, ASP may be able to
help. The ASP Ombudsman can help you resolve a dispute or problem with an
ASP member, but does not provide technical support for members' products.
Please write to the ASP Ombudsman at 545 Grover Road, Muskegon, MI 49442
or send a CompuServe message via CompuServe Mail to ASP Ombudsman
70007,3536.